Feeder for sluice system 10 cm

89.95€ 
incl. 19% VAT
plus shipping and handling

Scope of delivery

  • 1x Feeder holder, stainless steel with clamp and clamp
  • 1x container 2000ml with hose fittings
  • 1x baffle plate with jet pump holder
  • 1x overflow hose 25mm, length ca 30cm

Recommended accessories:

 

Feeder for Sluice System 10cm

The feeder is a material container and temporary store for the material to be washed. The material is pumped from the feeder to the hopper by a jet pump. The jet pump is not part of the feeder! . The feeder is an essential part of the washout system: the quality of a washout is often limited by the fact that the material can not be fed into the gutter evenly enough. For example, The material with a spoon, creates an overfilling of the washing system every time, since the material comes bumpy. This is alleviated if the material is not directly introduced into the channel, but e.g. In the Hopper for the wash-out system 10cm . It is best, however, if the material is very evenly in the hopper. One part of the solution to this problem is the feeder, the other the Jet Pump for Sluice System 10cm !

The feeder can, of course, be used not only on the wash-out system, but also on all its own buildings! Only the jet pump is necessary. It is also possible to use several containers in parallel. The container at feeder full or should be changed quickly, the container can be easily exchanged 2000ml. The container can be ordered from us, please contact us by mail (raw, pre-drilled or completely equipped with baffle plate)!

In the picture above all important functions are summarized again:

  • Inlet (for 8x1mm hose): This is where the material is fed when fed with one of our jet pumps. Please note that this is a 16mm spout, but we go in with an 8x1mm hose (outer diameter: 10mm) by just plugging the hose inside the spout. This has the advantage that the material at the spout can not jam and you can change the connection quickly. When the feeder is emptied, the flushing line is connected here so that the container does not fall dry.
  • Overflow 25mm: The supplied overflow hose limits the amount of water in the container and returns the excess water to the equalizer (bucket) or the sedimentator. Caution: Sludge particles and minor sand particles can escape from the overflow. The gold always falls into the container, however, the baffle plate provides.
  • Holder of stainless steel: The holder ensures good fixing of the container in any situation. It can be clamped to any 18mm pipe with a flanged clamp supplied. Both horizontal and vertical pipes can be used because the clamp can be turned through 90 degrees (screw connection). The holder also has a velcro strap that holds the bottle securely in the holder. The holder is, like almost all metal parts of the system, stainless steel.
  • 2000ml container: The container holds 2000ml, of which approximately 1600ml can be used for material. This corresponds to about 6kg of material for the gut concentrate! If this is not sufficient, the container can be changed quickly. Change containers are available from us, please inquire.
  • Impact plate with jet pump holder: The baffle plate brakes the material coming through the inlet and ensures that the solid particles fall into the container. For the special features, please see the paragraph "baffle plate" below.
  • Drain Cover: It may sometimes be desirable to empty or clean the container in the holder. Here the drain cover helps.

 

The baffle plate

In addition to the above-described function, the baffle plate also has the option of attaching the jet pump to almost every container. For this purpose, the baffle plate is removed from the container and the respective container is simply clamped on the edge. You just have to make sure that the container does not fall dry, then you can go!

Setting the amount of material

As can be seen in this picture, the material quantity of the jet pump and thus of the feeder can be adjusted by means of a valve. In addition, it is possible to influence the flow rate in the vertical direction by the displacement of the entire feeders. For example, Less material can be fed, the entire feeder can be lowered. This increases the conveying height of the material and thus reduces the amount. Similarly, the amount can be increased.

Feeder options

no

The Sluice System 10cm

Our wash-out system is completely new: there are different components with widths of 10cm for a stationary fine-washing trough for the home, which can be combined with each other and made into a desired system. Its main components are:

  • Headboard of the Sluice System 10cm with hopper and water flap, the "heart" of the system.
  • Sluice body, removable, can be lengthened as desired
  • Feeder, material storage for evenly supplying the system with material
  • Jet Pump for transport of material
  • Adapter for connecting components in any order and number
  • Rack for Sluice System 10cm, high-adjustable
  • Funnel for sluice body or headboard for use on a brook
  • Sedimentator for separating water and sand in a continuous process

The aim of the system is to create a fully automatic wash-out system with automatic material flow, which does not require any intervention. It must be filled only once with the pre-sieved concentrate and returns the extracted gold on the wash-out channel as well as the debris remaining in the sedimenter. Depending on the setting, you can prioritize the purity of the extracted material in the gutter or the catch rate and thus the remaining amount of gold in the remaining material (of course, zero residual quantity)!

Here you can see an example of high purity and a small residual quantity. The numbers show the wash result after the #th pass. Was washed with 0.5 g of Rheingold of grain size <0.2 mm. It is easy to see that after the second round almost no gold comes anymore (remember that one gram Rheingold of this grain has between 30,000 and 50,000 flakes!).

 The Goldblitz washout mat, first pass  The Goldblitz washout mat, second run  The Goldblitz wash-out mat, third run

However, the system is very flexible and can be used for the following applications:

  • ... as a fully automated machine for concentrating (also at the campsite)
  • ... as a fine rinsing trough with pump for home
  • ... as a mini-hopper with / without electropump and with / without funnel
  • ... as backpack channel with freely definable inner life
  • ... as mini-dredges for extracting columns and crevices
  • ... as a cleanup sluice for the final washout of Concentrate at the Brook
  • ... as an ultralange fine-rinsing trough (can be lengthened indefinitely)

Note:

Here you find an assembly manual for the feeder as PDF (approx. 4,3MB big).

For the books, our Goldwaschbuch (german!) is most warmly recommended (and not only by ourselves, see there!). It outlines, with many illustrations, the most important techniques of gold searching and presents some of the most important tools in comparison. The book can be delivered free of charge!


Add to Cart:

  • Model: wama_006
  • Shipping Weight: 0.7kg
  • Manufactured by: Goldblitz





This product was added to our catalog on Friday 22 July, 2016.

Your IP Address is: 54.221.159.188
Copyright © 2024 Goldblitz Shop. Powered by Zen Cart
Parse Time: 0.196 - Number of Queries: 178 - Query Time: 0.036234493743897